Almatis Logo

产品& 应用 / Polishing /  

Soft

Soft

The major focus of Almatis is on soft aluminas for polishing. These products can be applied on nearly all surfaces for the final polishing step to achieve high gloss and shine. Very soft products are used for very soft surfaces and for cleaning applications.

RAPOL 100

Alumina with SSA of 4 m²/g and  top cut of 200 µm for high cutting compounds.

A 13 LS

Alumina with top cut of 150 µm for high cutting compounds.

RAPOL 500

Alumina with SSA of 4,5 m²/g top cut of 90 µm. Further development of products like P2 and P2 FR for higher cut and similar polishing results.

P 2 MF

Polishing alumina with 90µm top cut achieving high gloss and dark shine polishing results.

P 6

Alumina with top cut of 125 µm produced in Germany for high cutting compounds.

P 2

Alumina with top cut of 90 µm produced in Germany. The "workhorse" in polishing industry giving high cut and good polish in on go.

P 2 FR

Alumina with top cut of 90 µm and fines removed. Due to removal of fine fraction the material has a high loose bulk density and oil absorption

A 13 -325

Alumina with top cut of 45 µm / 325 mesh, which can be used on all kinds of surfaces.

P 730

Alumina with top cut of 40 µm and best cost-performance ratio for the finishing of all kinds of surfaces.

P 10 feinst

Alumina with top cut of 20 µm giving nearly scratch free surfaces.

News & Events